-
20th Jan 2012, 03:25 PM
#1
On the note of thermometers - we have recently bought electronic data loggers for temperature and I have checked with the MHRA regarding 're-calibration'. For non-trial loggers we usually get one logger externally recalibrated then use that one to 'validate' the use of the others in the department therefore getting around paying for recalibration of all loggers. I have been assured by the MHRA CT helpline that this is fine to do for loggers used for clinical trial stock :-) another cost saving for R&D and the NHS!!!
-
22nd May 2012, 04:30 PM
#2
Hi pgamble,
We are in similar situation.New web based system installed in Pharmacy.As backup system can we calibrate min/max thermometer? Some of these thermometers are due calibration next month and some are due next year.Can we calibrate Min/max thermometers using one which are due next year or we need to calibrate using a brand new calibrated thermometer?
-
23rd May 2012, 11:54 AM
#3
Good post CTU - I think the MHRA are very reasonable in their expectations for IMP temp monitoring when the risks of not temp monitoring are demonstrably very low. We have a CTIMP running in which the IMP is a well established drug dispensed as per routine practice from hospital stock and used in it's licensed indication. We stated in the protocol and in the CTA application that the IMP will be stored as per routine practice; we don't maintain any temperature logs as part of the trial documentation therefore. That said, the trial is very much a 'Type A' trial.
-
28th May 2012, 12:39 AM
#4
Hi All,
My understanding about importance of temperature monitoring is that, as the product is in investigation use, every single thing they take as serious. And I think that if MHRA is linear with temperature control then people might misuse that phrase and start storing at any places.
-
28th May 2012, 12:43 AM
#5
Dear skumar,
It might not be a good idea to use any thermometer to use as reference point. Normally this responsibilities lies with QC department. If you want to calibrate some thermometer, you must have one reference thermometer which normally calibrated by manufacturer. Using that manufacturer calibrated thermometer you can calibrate other thermometers.........
-
4th Jul 2012, 06:29 AM
#6
Just realised in my post above I should have said apply for 30 degrees in the CTA application even if the SmPC says store at 25 degrees, not to apply for 30 degrees in the SmPC....obviously!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules